• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    I like that!!
  2. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    I also found another mistake I made. The front vertical hardwood 1/4 x 1/4 should have been cut shy on top by 1/4 for the cabin top cross member. I drilled it out and squared it up for proper fit.
  3. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    After checking the landing gear plate, I found that it was cut too small. I built a new one and installed the blind nuts for the Robart gear before gluing in place. I also glued in some stock for strength under F7. Mixing up several small batches of epoxy is time consuming and wearing on my...
  4. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    That's the way to do it!!
  5. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    Landing gear plate to fuse doubler added. This is where I saw other builds miss this step. I also added the left side mid cabin doubler.
  6. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    Then I added F6, F7, and F8
  7. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    Made some larger cuts on the bottom corners, and recessed the sides of the firewall for better support, before gluing it in place.
  8. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    I used F5 and the dash former to get an idea of how I wanted to build the new firewall. I had to make a few adjustments along the way, but I think it will work out ok.
  9. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    Hit a bit of a snafoo on the fuse sides. With the stretched plans and poor die cutting, when I went to check both sides were the same, they didn't match completely. For any one with a Bud Nosen Cub to build, I would suggest building the left side, with cabin top, then build the right lower, and...
  10. Stevendavis

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    That's a great way to do that!! I still have to use a razor knife on foam.
  11. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    Haven't been able to log in for a bit, now I know why. The new format looks nice!
  12. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    Built the left side first. The instructions say to build the rear first, then attach it to the front side piece. I pinned the side piece down, and built the rear off of it. Made more sense to me.
  13. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    Got started on the fuse framing. Glued the two fuse sides together and marked out where I need to make the cutouts. I went over the BUSA 1/4 scale Cub build to get an idea of what I needed to do. The BUSA Cub does more pre-fab work in their kits. I like to completely understand what I'm doing...
  14. Stevendavis

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Nice work!! I don't identify as a nonvax, I identify as a pure blood! :fist_pump:
  15. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    Finally got a little work done. Got the right wing hinged and got started on the fuse.
  16. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    I think it's going to be a good match for the Cub!!
  17. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    Thanks Mikey!
  18. Stevendavis

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Very nice work!!
  19. Stevendavis

    Scale Bud Nosen 1/4 Scale Cub?

    Ran the engine for the first time and I'm very happy with the engine so far!! OS GF40 - YouTube
  20. Stevendavis

    Scale Nelitz 1/3 scale Cub build

    Very nice!
Top