• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Jamesrini

    3dhs 89 slick

    Sure definitely when I get home ill post some pics That i have so far.
  2. Jamesrini

    3dhs 89 slick

    My 89 is almost ready for a maiden I'm using the dle 60 twin and looks like I have to move some stuff back to get the Cg close, with the heavier motor and smoke pump on the motor box opposite the ign. It's nose heavy. There's not alot of places to mount the pump behind the spar (at least on the...
  3. Jamesrini

    QQ yak 54 73" power setup

    Finally got to fly again got to flights on the yak in the blistering cold 24 deg. It felt really good I like the tacon it had plenty power on 19x8 prop. This plane is my only 30cc size electric so I can't compare to others yet. No prob pulling out of hovers. This plane seems easier to do...
  4. Jamesrini

    72" Extra 330SC

    Oh cool I didn't know you flew there I think I remember Glenn mentioning your name lol. I'm trying to make it to the meeting. And I will be flying on mon at the field I'm off for M. L. K. Day. It Looks rather windy sat and sun. Im sure You won't have any problems getting voted in.
  5. Jamesrini

    72" Extra 330SC

    I see your in nj I'm in Wayne nj and I fly at the gca club in Washington nj. The 72 was my first gasser too. Ill gladly help you with whatever. The 72 is one of my fav planes.
  6. Jamesrini

    QQ yak 54 73" power setup

    Nah I haven't had a chance yet been to busy with work and family stuff. I did get new batts and that solved my problem. The motor feels pretty powerful , full throttle has some good pull. Ill let you know if I get a chance to fly it.
  7. Jamesrini

    QQ yak 54 73" power setup

    I did get to maiden mine but had a problem with one of my batts it was sagging and hitting lvc with anything over 1/2 throttle but I did fly for 1-2mins and it seemed ok I didn't get to go inverted to check the Cg but it felt good and landed so easy so the Cg has to be close I ordered some...
  8. Jamesrini

    QQ yak 54 73" power setup

    Will do ! it will maiden tomorrow
  9. Jamesrini

    QQ yak 54 73" power setup

    Here are a few pics. I had the cowl on so the pics are taken from beneath the plane looking up into the cowl
  10. Jamesrini

    QQ yak 54 73" power setup

    Ill get some pics for you, I didn't have to build anything on it, it is a used plane and was originally powered by a glow engine. I'm lucky it balanced ok so far cause there's not much of a tray to move the batts around if its tail heavy ill need to add a piece of ply to bridge the gap between...
  11. Jamesrini

    QQ yak 54 73" power setup

    I just finished putting all the gear in mine today, tacon 1.10 , solar d771's, cc ice , 2-2s 1000mah and 2 4s 3700's. it seems to have balanced pretty good it's right in front of the wing spar (no test flights yet maybe next week) to be sure the Cg is good. The manual list the Cg numbers but...
  12. Jamesrini

    3DHS Fly Low In (East) July 11,12,13,14 Washington, New Jersey 6th Annual

    you know ill be there!!!!!! cant wait, it should be a blast as always
  13. Jamesrini

    QQ yak 54 73" power setup

    I have the same exact plane and I have yet to fly it so my advice is based on the research I've done sofar. I am doing the same as you 8s setup and am going the cheapie rought for servos and motor. I heard good things about the tacon Bigfoot 1.10 motor from hobbypartz it's kv is good for 8s and...
  14. Jamesrini

    3dhs 92" edge 540 !!!

    And I noticed in some pics the cowl is a split cowl like the 100cc planes
  15. Jamesrini

    3dhs 92" edge 540 !!!

    Sorry to be off topic a little but i think theres a chance it might work on the 92. I am doing the twin 60 in my 89 and it fits pretty good besides cutting the exhaust exit holes I only had to cut a small hole to make clearance for one plug wire. If the fuse of the 92 is 1/4" wider then the 89...
View older results
Top