• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    Added my light blue trim line.... Other than the gear... I am basically done with all the iron on covering at this point!!!
  2. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    Gap sealed the ailerons with matching ultracote cut to 3/4” strips. Used an incredibly dull hole punch for the hinges as the crinkling sound is just too much for me. LOL
  3. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    Wingtip update. Turns out the high heat method followed by mini iron circles is the absolute worst for removing the film if need be. . . I spent HOURS removing the covering in preparation for paint. Ended up with four light coats of paint. I may clear coat it in a week.
  4. AKNick

    The 'What did you do in your workshop tonight?' thread

    1.5m Turbo Timber Evolution!! Looks like the Timber line keeps growing! Has the reverse function just like the Draco... except in a lighter package and includes floats! Winner winner chicken dinner.... https://www.horizonhobby.com/product/turbo-timber-evolution-1.5m-pnp/EFL105275.html
  5. AKNick

    The 'What did you do in your workshop tonight?' thread

    Oh good 'Ol monokote! The two pieces of masking tape method works well too. Stick on either side and peel away from each other.
  6. AKNick

    110" TIMBER Assembly Thread

    Were always trying to help each other out - even if we already know the information! Better safe than sorry Pretty sure it's poly tubing. It holds a grip very well and seals the best - but is a pain to have to remove and install sometimes. It expands the most out of the three types in fuel...
  7. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    This is what I was thinking as well. Luckily the Deep Blue 2x Enamel is an almost perfect match to the deep blue ultracote.
  8. AKNick

    110" TIMBER Assembly Thread

    Good work! :yesss: Is that red poly fuel tubing in the tank with a ceramic clunk? Keep in mind that tubing (along with tygon) grows in in fuel, I would shorten it a 1/4-3/8" as it looks like there is very little clearance. A lot of guys are using Viton inside the tank these days including...
  9. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    Well I got close, but still had wrinkles. When removing the covering, the material separated - creating a huge mess. So I called it a night and will pick at and scrub the covering off. Very much considering painting now. Anybody have experience with enamel paint over ultracote? I have a small...
  10. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    I last tired to cover a wingtip at 10pm, I left for work at 4am.... I think I got 3 hours of sleep last night. . . Kept having a dream my little girl was up and trying to get into things - Had to remind myself that shes asleep in her crib. LOL
  11. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    Very much considering this. Not sure how enamel will hold up ontop of ultracote. Thanks, This might be a new strategy. One issue is the white gel coat primer that came on the wingtips wants to bond to the adhesive as soon as the covering gets tacky... makes it super hard to work around the...
  12. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    I am absolutely failing tonight. Having a heck of a time trying to cover my wingtip. Tried about five times and although getting better, it’s not good enough. This rounded fiberglass tip and deep blue ultracote sticks very well and doesnt want to erase the wrinkles. Any tips? I’ve been sealing...
  13. AKNick

    110" TIMBER Assembly Thread

    Awesome!! Congrats! I used about 20% mix for flaps to elevator.
  14. AKNick

    Discussion The I’m Going/Went Flying Thread

    Nope
  15. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    Floats... eventually. I'm debating whether to put it on wheels first to get it up in the air and build the floats later.
  16. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    The manual mentioned using double back tape for the tail cones. I had some 3M 950 1/2” tape and decided to give it a try. This would make accessing the elevator and rudder linkages possible in the future... seems to work well and is holding great.
  17. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    Installed the sea fins. Not sure what size screws I was supposed to use, but but I ended up having to file the heads down a little bit for some extra clearance.
  18. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    Glued the upper tail cone on
  19. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    Slapped the muffler on.
  20. AKNick

    Discussion The I’m Going/Went Flying Thread

    had a busy week. Flew off floats one morning. I love this little Tom Herr design “dragon” flying boat. Just a real joy to fly off glassy water. Water turned super calm and I went home to find baby and my wife still snoozing so I loaded up the TBM and flew a few more flights. Super fun...
Top