• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    You doing this just for the ability to cover with film?
  2. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    If I were covering a Cub I would definitely sew the fuselage fabric to form an envelope. What a great transition it provides between the fin and fuselage.
  3. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    I'm using Stits fabric and tapes applied with Steward Systems water based products. I can work inside the house without the odor of MEK. I used Stits products on the Super Cub last fall because I could work outside or in the garage with the doors open. The Stits product is easier to use in my...
  4. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    When I went to the shelf where the fabric is stored I realized that there was not enough fabric to cover the wings! As a matter of fact there was only enough to cover the bottom of one wing. The bottom of the right wing is covered and screws installed, shrunk to 200 degrees F, just enough to...
  5. TonyHallo

    Mini lathe (and mill) discussion.

    I bought a few from here, quick service.
  6. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Well I spent a lot of time there! Headed there now.
  7. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    The seat look great! Maybe a magnetic switch
  8. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Yes for the first one, the second one not as much.
  9. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Switching gears from the Cherokee, getting ready to put the fabric back on. Decided to sand down the bench top and put a coupple coats of polyurethane on before the festivities begin.
  10. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Completed the final two molds for this mold building season. Wil lay up the main gear pants at my leisure after wax on, wax off.
  11. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Do you do anything special on the power distribution side?
  12. TonyHallo

    Mini lathe (and mill) discussion.

    Nice, thanks Steven.
  13. TonyHallo

    Mini lathe (and mill) discussion.

    Does this sharpen the ends and sides? Where did you get the plans?
  14. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    Always nice to get the plane sitting on it's front paws and hind leg.
  15. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Best tool I found to remove the old fabric cement is a pin stripe removal tool ,even works on the balsa. The left aileron on the top is ready for fabric, made the lightening holes larger and replaced the 1/4" thick balsa rib sections with 1/4" x 1/8" spruce, the screws didn't work well in the...
  16. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Finished cleaning off the right wing yesterday, what a pain getting the screws out since I had filed the heads down to reduce the height when it was originally covered. The original screws were slotted, had to re-slot a few where the filing was aggressive. The new screws are button heads with...
  17. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    I have used cf arrow shaft for bottom fuselage stringers on several builds, straight and strong.
  18. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Now there's a nice selection of clamp sizes!
  19. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    Does the threaded end get glued into the arrow shaft?
  20. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    That's pretty typical, I bought a 4x8 sheet from Eplastics and had them cut it into 6 24" x 32" pieces. They shipped it rolled so shipping wasn't too bad. What size are looking for? I can get is and mail to you if you like.
Top