• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Getting close to fabric?
  2. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Put two coats of resin mixed with carbon powder, one layer of 6 ounce cloth, two layers of chopped fibers on the ends. Will add the chopped fibers the remaining surfaces tomorrow. Might need another quart of resin.
  3. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Spent a lot of time recently working on the "new to me" mill, time to get back on the Cherokee. Mounted the canopy plug to a dry eraser board purchased at Lowes, then put on 14 coats of wax, sprayed the last coat of release film this morning. Hope to lay up the mold tomorrow. It will get to...
  4. TonyHallo

    Mini lathe (and mill) discussion.

    A drill press is still handy, drilling on a mill can be a pain. If I'm just drilling holes, I would normally prefer the drill press.
  5. TonyHallo

    Mini lathe (and mill) discussion.

    Now that is a mill! Hope you have a big truck! You're going to have a real nice shop. Have any idea of the weight?
  6. TonyHallo

    Mini lathe (and mill) discussion.

    I tried a table on my drill press many years ago. I was milling steel and the results were less than ideal. I would image that aluminum and plastic would work however. The drill press lacks the mass and rigidity needed.
  7. TonyHallo

    Mini lathe (and mill) discussion.

    Don't get too hung upon threading, for the type of work we do you can just use a die. I single pointed one thread on my lathe in the past 16+ years!
  8. TonyHallo

    SOLD! Aeroworks QB Extra 300 LP 50cc

    That was crazy the way Aeroworks just drug up and quit, they make some nice planes.
  9. TonyHallo

    Next build discussion

    Anything with a multi cylinder 4 stoke is cool! Forget the Yak! Here's my list of possible builds: 30% Chipmunk - Most likely 33% Piper PA20/PA22 30% Cessna 150/152 Sig Morrisey Bravo 25% Piper TramaHawk (Great Planes Kit) 33% Wayne Urley Laser Or finish a couple that I already Started!
  10. TonyHallo

    Mini lathe (and mill) discussion.

    I keep my keys and live centers mounted on the lathe back splash, as for speed I use the 400 rpm for most applications. Leave the key ther once and start the lathe, you will not forget again! I see your lathe is Vevor brand, just found them recently.
  11. TonyHallo

    Mini lathe (and mill) discussion.

    Quick up date on the mill. Adding 3 axis DRO and power feed on the x axis. Purchased the DRO from Vevor, $180 includes the display and scales along with the R8 collet holder . I have the X and Y axis scales installed and waiting for aluminum to finish off the Z axis. The scales supplied are...
  12. TonyHallo

    Next build discussion

    The 30% Chipmunk cowl is big, almost 12" wide. That may be my next build after the Cherokee.
  13. TonyHallo

    Mini lathe (and mill) discussion.

    It's holding up just fine. I have added power cross feed. Cross Feed
  14. TonyHallo

    Next build discussion

    50% scale Mooney Mite. I have the same problem, thinking about the next build before finishing the current build!
  15. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    A 2mm screw will be about the same size as a #2 servo screw. That is a weak spot on planes like the Cub and Champ. My Champ cracked in that area on a harder than normal landing, ended up milling a slot and epoxied in a 1/8" piece of music wire, did both sides, thankfully it is hidden under the...
  16. TonyHallo

    Save up to 40% off NOW - April 8th

    Interesting, the servo link takes me to Facebook!
  17. TonyHallo

    Mike Hurley Extra

    Post some photos.
  18. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Switched the efforts to the canopy plug while the epoxy cures. What a pain, the primer just clogs the 320 dry sandpaper. Sand a few strokes then clean the paper out with a slap of a putty knife. Would rather wet sand but worried about getting the balsa wood structure wet.
  19. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    I finally got around to marrying the fin to the fuselage. How much easier the laser level makes things especially on these round shaped fuselages. The tail post is long and is inserted into a slot on the fuselage. The mating surfaces were painted with the unthicken epoxy so that it would...
  20. TonyHallo

    Mini lathe (and mill) discussion.

    Here are old and new shots. Still got a ways to go. I had to disassemble the head so that I could lift it onto the column, decided to replace the bearings in the spindle pulley shaft, felt a little stiff, I think it was the 42 year old grease. All the other bearing feel good. I may take the...
Top