• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Drew

    TailDraggerRC 20AWG Servo Wires

    Just placed an order for all my servo leads to go into my new Edge.... Cant wait to get them installed !!!! Thanks for having the best prices out there.
  2. Drew

    3dhs 89 slick

    As long as there's no fog or moister in the air, should be fine. If it starts raining we can just throw the planes under the cabana inclosure. Plus, this is Texas, it will change in 2 hours....
  3. Drew

    3dhs 89 slick

    Cool, sounds good....but the weather isn't looking to good for this weekend. :(
  4. Drew

    "2" Turnigy 2200mAh 2S 30C Lipo's

    Sold off site.....
  5. Drew

    3dhs 89 slick

    Don't forget to text me on a time !!!!
  6. Drew

    "2" Turnigy 2200mAh 2S 30C Lipo's

    Selling 2 Used Turnigy 2200mAh 2S 30C Lipo's. Ran these in a 35% airframe for receiver power. Packs still perform great and have a slight puff that you can hardly notice. I need bigger packs. Come with deans connectors, $20 shipped OBO PayPal only please.
  7. Drew

    PILOT 37% Edge 540 (107") BUILD

    Sounds good !!!
  8. Drew

    PILOT 37% Edge 540 (107") BUILD

    Oh for sure....video is a must
  9. Drew

    PILOT 37% Edge 540 (107") BUILD

    Was a little worried about obtaining a good CG with the rudder servo in the tail with the added servo mount, so last night I mocked up the whole plane to check it. I'm actually nose heavy in the pic without the prop bolts installed. VERY HAPPY !!! :banana:
  10. Drew

    PILOT 37% Edge 540 (107") BUILD

    More to come.......
  11. Drew

    PILOT 37% Edge 540 (107") BUILD

    Final install of engine, ignition, ignition battery, and throttle servo. I built a little plate for the ignition to mount to which came out great. And finished up my rudder link.
  12. Drew

    PILOT 37% Edge 540 (107") BUILD

    Got some of the 4titude tank installed and fuel dot.
  13. Drew

    PILOT 37% Edge 540 (107") BUILD

    Finished off the firewall today. Mounted the top and added the included tri-stock. I use thick CA to glue it in then run thin CA into all voids and kick it till it wont take anymore. Its very strong. Also got the included throttle servo mount installed. I use thick CA as well as screws...
  14. Drew

    FLI V at the 114th Sponsored by 3DHS and 3DRCFORUMS

    I hear thats the best prop for the 111.
  15. Drew

    Pilot RC 35% (106") Extra 260

    Absolutely !!!! Let me know when.
  16. Drew

    Pilot RC 35% (106") Extra 260

    Did you run it yet Gary ? I was just looking up the weight difference from my 100L to your 111 and its adding about 8 ounces to the nose with that motor. I'm curious if you balanced it yet ???
  17. Drew

    Pilot RC 35% (106") Extra 260

    I know I'm going to get hated on for this, but I don't use ANYTHING on my ignition except a fail safe switch and 4.8 battery. Every battery eliminator, ignition kill switch that Ive used has failed on me or given my weird engine issues. So, I just use my fail safe in my radio to completely close...
  18. Drew

    74" Edge 540

    One other thing to check in these kits is the horn being to long and sticking out the other end bulging up the covering. Just an FYI, sand the ends down if there to long and bottom out.
  19. Drew

    74" Edge 540

    Ive had this happen on almost every model with these type of horns. I typically just glue the wood the comes out back in with CA. Then make sure it all goes back together fine and epoxy. Never an issue. If you didn't save that wood, just make a small piece to replace it.
  20. Drew

    PILOT 37% Edge 540 (107") BUILD

    Thanks, Im really enjoying it !!!
Top